Jay's Outdoor Life

Vole Smackdown: The Expedition

Welcome to my first full-length vole pesting video here at camp Hajimoto. We have a ton of garden destroying voles and I have added them to my hit list. In this video I jack 10 of em up for your pest video watching pleasure lol

Below are some links to the folks I shouted out in this video. Please go and visit their channels and tell them Hajimoto sent ya!

Tofazfou
https://www.youtube.com/user/tofazfou

Hunter One
https://www.youtube.com/channel/UCtWPWVSfSgJR0Z_zoLfrBmQ

BWalton Airgun Hunter Extreme
https://www.youtube.com/channel/UCgeuw4_-CMvgevEFLGMFSFA

About the rifle used:
Benjamin Marauder GEN2

The rifle has been completely torn apart and all metal openings have been deburred and polished with a hone and 1200 grit sand paper. I shoot JSB 18.4GR at 865FPS = 30FPE. Special thanks to Travis Whitney from Air Rifle Technology for the TSS and Super Hammer, they make adjusting the rifle easy peasy Japanesey! The cocking action is smooth as silk now.

The regulator is set to whatever gave these results. The HUMA regulator bar indicator is very crude and it is near impossible to determine the actual bar setting. I removed my pressure gauge block so that I would maintain maximum air volume capacity in my air reservoir or else it would be simple to determine regulated pressure.

Below are some of the mods and equipment I used in this hunting video.

*Benjamin Marauder Gen 2 .22*
http://www.airgundepot.com/benjamin-marauder.html

*HUMA Pressure Regulator*
http://www.huma-air.com/Benjamin-Marauder-pressure-regulator

*ART TSS (Twin Spring System) *
http://www.airrifletechnology.com

*ART MDS SUPER Hammer *
http://www.airrifletechnology.com

*Scope:* *UTG 30mm SWAT 3-12×44 AO*
http://www.airgundepot.com/utg-3-12x44ao-swat-accushot-rifle-scope-ez-tap-illuminated-mil-dot-reticle.html

*Ammo:* JSB Exact Jumbo Heavy .22 Cal, 18.13 Grains, Domed
http://www.pyramydair.com/s/p/JSB_Match_Diabolo_Exact_Jumbo_Heavy_22_Cal_18_13_Grains_Domed_500ct/690

*Video Capture:* Hajimoto Scope cam Assembly using the GoPro Hero 4 Black
2nd camera Canon Vixia R62

Thanks for stopping by and watching my video. If you have questions please feel free to post them below.

Powered by WPeMatico

Exit mobile version